Seat adjustment (Opel Vectra A)

Longitudinal movement of the seat

Pull the lever up, then move the seat, release the lever, lock the seat.

Do not attempt to change the seat position while driving. Using the lever may cause the seat to move uncontrollably.

Seat back adjustment

Turn the adjuster on the outside of the seat.

Lumbar support: adjustable using two adjusters. Lumbar support can be adjusted according to personal requirements.

Pressure adjustment is carried out at two levels. During manufacturing at the factory, the middle position is set. By turning forward, the pressure can be increased, by turning back: decreased. The total range of movement is 4.5 turns.

Seat height adjustment

Turn the handle.

The seat height should be appropriate for your height. The driver's seat position in relation to the pedals and steering wheel should also be adjusted.

Headrests

Pull the headrests up or push them down to adjust the angle.

To adjust the height of the headrests, tilt them forward.

The top edge of the headrest should be at eye level, not at the height of the back of the head.