Front door
Removing
1. Disconnect the negative battery cable.
2. Remove the rear view mirror adjuster.
3. Remove the inner handle cover.
4. Remove the panel from the door closing handle.
5. Remove caps.
6. Loosen the fixing screws.
7. Remove the door closing handle.
8. Remove the power window handle.
9. Remove the clip and remove the door lock button.
10. Loosen the fixing screw.
11. Remove the button trim panel.
12. Remove caps.
13. Loosen the bottom and front fixing screws.
14. Remove the door trim panel.
15. If necessary, remove the protective film.
Installation
1. Installation is carried out in the reverse order of removal.
2. On models with side airbags, check that the protective film is firmly glued to the door and does not allow air to pass through.
Backdoor
Removing
1. Disconnect the negative battery cable.
2. Remove the ashtray.
3. Remove the door handle panel.
4. Remove the panel from the door closing handle.
5. Remove the fastening clip of the door lock button.
6. Remove the door lock button.
7. Loosen the trim panel fixing screw.
8. Remove trim panel.
9. Unscrew the fixing screws of the door closing handle.
10. Remove the door closing handle.
11. Disconnect the power window connector, if necessary.
12. Remove the power window handle.
13. Remove the door sill light and disconnect the connection connector.
14. Loosen the trim panel fixing screws.
15. Remove trim panel.
16. Disconnect the speaker connector.
17. Remove the protective film if necessary.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments