Trunk lid and support pillars (Opel Omega B)

Trunk lid

Removal

1. Disconnect the connection connector on the trunk lid.

2. Mark the installation position of the lid hinges.



3. Unscrew the fastening nuts (indicated by arrows) and remove the lid.

4. Disconnect the springs, unscrew the mounting bolts and remove the hinges if necessary.

Installation and adjustment

1. Installation is carried out in the reverse order of removal.

2. Install the lid according to the marks made earlier.

Support posts

Removal

1. Remove the spring clip and disconnect the upper end of the strut from the trunk lid.

2. Loosen the mounting bolts and remove the rack.

Installation

Installation is carried out in the reverse order of removal.