Malfunction | Cause | elimination |
After switching on the ignition, the control lamp does not light up | No current flowing to the sensor Corroded contacts Defective oil pressure sensor | Check wires Check wires Replace sensor |
The control pump does not go out after starting the engine | The oil is very warm Damaged pressure sensor Too little oil pressure Reducing valve sticking | It is normal if the control lamp goes out when the gas is increased Check pressure according to instructions Check pressure according to instructions Remove and check valve |
The control lamp lights up while driving | Too little oil pressure Reducing valve sticking | Check pressure according to instructions Remove and check valve |
Too low oil pressure | Very little oil in the engine Defective oil pump Earbuds worn out | Check oil level Check pump Rebuild engine |
Visitor comments