Removal and installation the bumper (Opel Kadett D)

Removal

The bumper is attached to the body with 8 bolts.



Unscrew the hex bolt on each side from the inside of the wing in the corner with the rod and in the area of the turn signal pump.

But on both longitudinal body members, unscrew 2 bolts with hex heads from below, remove the bumper.

Installation

Install the bumper and screw it to the side members by hand.

Text copied from a web portal: www.OPELBOOK.ru

Screw in 2 hex bolts on each wing, tighten all bumper bolts.