Removing
1. Disconnect the negative battery cable.
2. Remove the trim panel under the instrument panel.
3. Mark the installation position of the steering column shaft in relation to the flexible connection, then unscrew the upper pinch bolt (indicated by an arrow).
4. Remove the steering wheel.
5. Remove the steering column covers.
6. Remove the ignition switch and combination switches.
7. Remove the mounting screws and remove the fuse and relay box from the instrument panel.
8. Loosen the top fixing nut (A) and drill out the shear bolt (IN).
9. Remove the steering column.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments