Models without an airbag module
Removing
1. Set the front wheels straight.
2. Remove the panel in the center of the steering wheel and disconnect the two wires.
3. Loosen the fixing nut and remove the washer.
4. Mark the installation position of the steering wheel and remove it.
Installation
Installation is carried out in the reverse order of removal.
Models with airbag module
Removing
1. Before removing the air bag module, disconnect the negative battery cable and wait at least 1 minute to discharge the module capacitors.
2. Remove the air bag module.
3. Set the front wheels straight.
4. Mark the position of the steering wheel and disconnect the horn button connector.
5. Bend the tongues.
6. Loosen the fixing nut.
7. Remove the fixing nut.
8. Remove the puck.
9. Remove the steering wheel from the steering column.
10. If necessary, use a puller.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments