Attention. If the support legs are removed, alternate hood support must be provided to prevent vehicle damage or personal injury.
1. Remove the inner lining of the tailgate.
2. Disconnect the support legs from the tailgate.
3. If necessary, disconnect the limiter tape from the tailgate.
4. Disconnect the electrical connector.
5. Disconnect the harness holder.
6. Disconnect the rear window washer hose.
7. Remove the wiring harness bushing, connectors and rear window washer hose from the tailgate.
8. Mark the position of the tailgate awnings relative to the body with a marker and unscrew the four bolts (1) canopies of the tailgate.
Note. Tightening torque: 22 Nm.
hatchback
station wagon
10. With the help of an assistant, remove the tailgate (2) from the car.
Note. If the tailgate is to be replaced, rearrange all necessary components from the old door to the new one.
11. Installation is made in an order, the return to removal.
12. After installation, adjust the position of the tailgate.
Visitor comments