1. Place the shift lever in neutral position. Raise and secure the front of the vehicle.
2. Remove retaining clips (indicated by an arrow).
3. Remove the protective cover of the gearshift mechanism.
4. Loosen the pinch bolt (indicated by an arrow).
5. Disconnect and remove the shift lever cover. Slide back the rubber cover of the lever.
6. Install the KM-631A tool in the shift lever cover and push the lever to the right.
7. Turn the shift rod clockwise until it stops.
8. Tighten the pinch bolt.
9. Remove the locking tool and check the operation of the shift mechanism.
10. Install covers.
Visitor comments