Contents: Front seat ⬇ Rear seat cushion ⬇ Backrest of the rear seat (models…⬇ Backrest of the rear seat (station…⬇
Front seat
Right Front Seat Mounting Bolt Tightening Procedure
Left Front Seat Mounting Bolt Tightening Procedure
Removal
1. Disable the airbag system.
2. Loosen the mounting screw.
3. Remove the casing.
4. Remove the trim panel from the outer seat rail.
5. Lock the mechanical seat belt tensioner mechanism.
6. Move the seat forward and remove the rear mounting screws.
7. Remove the front mounting screws.
8. Disconnect the connection connectors and remove the seat.
Installation
Installation is carried out in the reverse order of removal.
Rear seat cushion
Removal
1. Pull the seat fastening straps outward.
2. Raise the seat and disconnect the heating element connection connector.
3. Remove the rear seat.
Installation
Installation is carried out in the reverse order of removal.
Backrest of the rear seat (models with a sedan body type)
Removal
1. Remove the pillow.
2. Disconnect the center seat belt from the buckle.
3. Bend back the fastening tabs and remove them.
4. Lower the seat back, unscrew the hinge mounting bolts and remove the seat back.
Installation
Installation is carried out in the reverse order of removal.
Backrest of the rear seat (station wagon models)
Removal
1. Remove the rear seat cushion.
2. Remove the center seat belt.
3. Unscrew the mounting bolts and remove the backrest.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments