Apply a line 1-2 cm wide on the flange of the V-belt pulley.

Warm up the engine to an oil temperature of 50-70°C.
The cold start accelerator button must be depressed.
All electrical consumers are switched off.
Measure idle speed with a tachometer.

Loosen the adjusting screw lock nut.
Adjust idle speed:
- engine 16D - 850±50 rpm.
- engine 16DA - 850±30 rpm (arrow)
[Original source is on the website OpelBook.ru]
Note: Set idle speed accurately.
Lock the adjustment screw and varnish.

Visitor comments