1 - Thoroughly clean the joints and around them before removing parts.
2 - Put the removed parts on a clean lining and cover them. Use film and paper. Do not use a lint-free cloth.
3 - Carefully close or cover open parts if repair robots are not urgent.
4 - Install only clean parts:
- Spare parts should not be taken out of the packaging until immediately before installation.
- Do not use parts that were not packaged (for example, in factory boxes, etc.).
5 - With the system open:
- Avoid using compressed air if possible.
- Do not move the vehicle.
In addition, care must be taken to ensure that diesel fuel does not get on the coolant hoses. If necessary, clean these hoses immediately. Damaged hoses must be replaced.
Visitor comments