Replacing the front wheel speed sensors (Opel Insignia A)

GNA suspension

1. Raise and secure the vehicle.

2. Remove the front wheel from the vehicle.

3. Loosen the bolt (1) securing the front wheel speed sensor.

Note: Tightening torque: 9 Nm.

4. Disconnect the electrical connector (2) and remove the front wheel speed sensor from the steering knuckle.

5. Installation is carried out in the reverse order of removal.

GNB suspension

1. Raise and secure the vehicle.

2. Remove the front wheel from the vehicle.

3. Loosen the bolt (1) securing the front wheel speed sensor.

Note: Tightening torque: 9 Nm.

4. Disconnect the electrical connector (2) and remove the front wheel speed sensor from the steering knuckle.



(Original posted on the website: www.OpelBook.ru)

5. Installation is carried out in the reverse order of removal.