2.0L SOHC engine
Removal
1. Remove the protective shield from the bottom of the engine.
2. Drain the engine oil.
3. Disconnect the sensor connection connector.
4. Loosen the mounting bolts and remove the sensor.
Installation
Installation is carried out in the reverse order of removal.
2.0L DOHC Engine
Engines with a solid oil pan
Look higher description of removal and installation of oil level sensor for 2.0L SOHC engine.
Engines with a composite oil pan
See below for a description of how to remove and install the oil level sensor for 2.5 and 3.0 liter engines.
2.5 and 3.0 liter engines
Removal
1. Remove the oil pan.
2. Loosen the mounting bolts and remove the sensor.
Source is on the website (www.opelbook.ru)
Installation
Installation is carried out in the reverse order of removal.
Visitor comments