Replacing the steering column switch bracket (Opel Insignia A)

1. Remove the steering wheel.

2. Remove the upper and lower steering column covers.

3. Unscrew the two mounting bolts (1).

4. Disconnect all electrical connectors.

5. Remove the steering column switch bracket (2).

[Text copied from this portal OpelBook.ru]

6. Installation is carried out in the reverse order of removal.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Checking the article: Zinoviev Kirill

Share information:

Opel Insignia A: Steering

Replacing the upper and lower steering column covers
Steering wheel replacement
Power steering system
General information

Replacing the steering column turn signal switch
Replacing the steering column lock and ignition switch
Replacing the intermediate steering shaft
Steering column replacement
Checking the power steering
Bleeding the power steering system

See similar ones from other Opel car manuals:
▶ Removal and installation the steering column switch contact… Opel Astra H (2004-2009)
▶ Removal and installation the steering column switch Opel Corsa B (1993-2000)
▶ Removal and installation the steering column switch contact… Opel Vectra C (2002-2008)
▶ Replacing the steering lock and steering column bearing Opel Frontera A (1991-1998, petrol)
▶ Replacing the V-belt of the power steering pump drive Opel Kadett E (1984-1995)

Link to this page in different formats

HTMLTextBB Code

Visitor comments

No comments yet