Washer fluid reservoir
1. Remove the front bumper.
2. Remove the mounting screws and the front section of the left front wheel arch insert.
3. The reservoir is located behind the inner section of the front bumper.
4. Remove the inner section of the front bumper.
5. Disconnect the pump connector.
6. Disconnect the hose from the pump.
7. Disconnect the hose and connector from the additional pump, if necessary.
8. Remove the neck.
9. Remove the wires from the fasteners on the inner section of the bumper and remove the bumper together with the tank.
10. Unscrew the fixing bolts and remove the tank.
Installation
Installation is carried out in the reverse order of removal.
Washer pump
Removing
Disconnect the hose and connection connector from the pump and remove the pump from the tank.
Installation
Installation is carried out in the reverse order of removal.
Windshield Sprinklers
Removing
1. Disconnect the connector and hose from the sprinkler.
2. Release the latches and remove the sprinkler.
Installation
Installation is carried out in the reverse order of removal.
Rear Window Sprinkler - Estate Models
Removing
1. Insert a screwdriver between the sprinkler and the seal. Release the latches and remove the sprinkler.
2. Disconnect the hose.
Installation
Installation is carried out in the reverse order of removal.
Sprinklers for headlights
Removing
1. Remove the nozzle from the tube.
2. Remove headlight.
3. Disconnect the hose from the tube at the bottom of the headlight.
4. Loosen the fixing screws and remove the tube.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments