To perform the work, an inspection ditch or overpass is required.
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Holding the bolt from turning with a 16 mm key, turn off the nut securing the lower support to the subframe with a 16 mm key.
3. Using the TORX E13 key, we unscrew the two bolts securing the support to the gearbox.
4. We remove the mounting bolt to the subframe and remove the support.
5. Install the parts in reverse order. Tighten nuts and bolts to specified torque (see «Reference data»).
Visitor comments