To perform the work, an inspection ditch or overpass is required.
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Holding the bolt from turning with a 16 mm key, with a 16 mm key we unscrew the nut 1 fastening the lower support to the subframe, with the TORX E14 key we unscrew the two bolts 2 fastening the support to the gearbox, remove the fastening bolt to the subframe and remove the bar.
3. Install the parts in reverse order. Tighten nuts and bolts to specified torque (see «Reference data»).
Visitor comments