Execution sequence
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Using the TORX T20 key, we unscrew the three screws of the upper fastening of the glove box.
3. With the same key, unscrew the three screws of the bottom fastening of the glove box.
4. We remove the box from the instrument panel by pulling it towards you.
5. Disconnect the block of the wiring harness for the backlight of the glove box and completely remove the box.
6. Using a 5.5 mm wrench, unscrew the three bolts securing the filter cover.
7. Remove the air conditioner filter cover.
8. Remove the filter element.
Warning! Install the filter element with the utmost care to avoid damaging it.
9. Install the parts in reverse order.
Visitor comments