Replacement of the lower and upper trims of the central body pillar (Opel Insignia A)

1. Remove the front and rear door sill trims.

2. Pull the front ceiling grab handle down and, holding it in this position, use a small screwdriver to unhook the covers of the mounting bolts. Unscrew the bolts (1) and remove the front ceiling grab handle (2).



3. Move the front seat forward as far as it will go.

4. Unhook the three fasteners (1) and remove the lower and upper center pillar trims as an assembly.



5. Disconnect the upper and lower parts of the center pillar trim.

6. Installation is carried out in the reverse order of removal.

Article posted on Internet portal (OPELBOOK.ru)