In a manual climate control system, the user sets the air temperature, distribution and flow rate. However, they remain unchanged until the next edits are made by the user.
Automatic climate control allows the user to set parameters and select automatic control of the system.
The air conditioning unit, which is a plastic case mounted on the transverse beam of the instrument panel, may be different depending on the type of air conditioning unit.
Components of the manual climate control unit (C68):
1. Expansion valve seal.
2. Evaporator inlet seal.
3. Expansion valve post.
4. Evaporator outlet seal.
5. Expansion valve seal.
6. Air intake nut.
7. Air intake.
8. Air intake housing.
9. Air intake housing bolt.
10. Front intake flap lever.
11. Thrust intake flap.
12. Front drive intake damper.
13. Bolt of the forward drive of an inlet gate.
14. Middle intake flap lever.
15. Rear intake flap lever.
16. Passenger compartment air filter.
17. Evaporator housing clamp.
18. Bolt of the upper part of the air conditioner housing.
19. The upper part of the air conditioner housing.
20. A bolt of the top part of the case of climatic installation.
21. Blower motor.
22. Blower motor bolt.
23. Bolt of the blower motor control unit.
24. Blower motor control unit.
25. Bottom drain hose of the evaporator and blower unit.
26. Top drain hose of the evaporator and blower unit.
27. Auxiliary heater core bolt.
28. Auxiliary heater core.
29. Housing of the evaporator and heater.
30. Clip of the evaporator and heater body.
31. A bolt of the case of the evaporator and a heater.
32. Bolt of the air conditioner unit.
33. Air conditioning refrigerant temperature sensor.
34. Nut of the air conditioning unit.
35. Housing of the evaporator and heater.
36. Temperature damper drive.
37. Bolt for temperature damper drive.
38. Cam drive mounting plate bolt.
39. Cam drive mode selection.
40. The lever of the left drive of the rear air damper of the front floor console.
41. Cam for selecting air conditioner and heater modes.
42. Bolt of the cam drive of the choice of modes.
43. Mode selection cam drive mounting plate.
44. Ventilation damper lever.
45. Shutter lever for selecting modes.
46. Ventilation flap gear.
47. Mode selection damper gear.
48. Air conditioning evaporator.
Components of the air conditioning unit with automatic control (CJ2):
1. Evaporator inlet seal.
2. Expansion valve post.
3. Evaporator outlet seal.
4. Air intake nut.
5. Air intake.
6. Air intake housing.
7. Air intake housing bolt.
8. Front intake flap lever.
9. Rear drive intake damper.
10. A bolt of a back drive of an inlet gate.
11. Bolt of the forward drive of an inlet gate.
12. Front drive intake damper.
13. Front intake flap lever.
14. Rear intake flap lever.
15. Cabin air filter.
16. Evaporator body clamp.
17. Vent housing bolt.
18. The upper part of the air conditioner housing.
19. Bolt of the block of climatic installation.
20. Blower motor.
21. Blower motor bolt.
22. Bolt of the blower motor control unit.
23. Blower motor control unit.
24. Lower drain hose of the evaporator and ventilation unit.
25. Upper drain hose of the evaporator and ventilation unit.
26. Auxiliary heater core bolt.
27. The core of the additional heater.
28. Heater and evaporator body.
29. Clamp of the heater and evaporator body.
30. A bolt of the case of a heater and the evaporator.
31. Bolt of the air conditioning unit.
32. Right lower internal temperature sensor.
33. Right lever drive rear damper front floor console.
34. Bolt of the right actuator of the temperature damper.
35. Right drive temperature damper.
36. Nut of the air conditioning unit.
37. Right upper internal temperature sensor.
38. Left drive temperature damper.
39. Bolt of the left actuator of the temperature damper.
40. Mounting plate bolt for mode control cam drive.
41. Cam drive mode control.
42. The lever of the left drive of the rear air damper of the front floor console.
43. Cam control modes of the air conditioner and heater.
44. Bolt cam drive mode control.
45. Cam drive mounting plate for mode control.
46. Ventilation damper lever.
47. Lever damper mode selection.
48. Ventilation flap gear.
49. Mode selection damper gear.
50. Air conditioner evaporator.
Visitor comments