Rearview mirror
Removing
1. Remove trim panel.
2. Remove the soft insert and disconnect the connection connector.
3. Remove the door closing handle. Disconnect the mirror connector.
4. Loosen the three fixing screws (indicated by arrows).
5. Remove the mirror.
Installation
Installation is carried out in the reverse order of removal.
Mirror glass
Removing
1. Press down on the upper inner corner of the glass.
2. Remove glass.
3. Disconnect the heating element connector.
Installation
Installation is carried out in the reverse order of removal.
Electric motor
Removing
1. Remove glass.
2. Loosen the two fixing screws.
3. Remove the engine.
4. Disconnect the connector.
Installation
Installation is carried out in the reverse order of removal.
Power Mirror Switch
Removing
1. Remove the door closing handle.
2. Disconnect the connector and remove the switch.
Installation
Installation is carried out in the reverse order of removal.
Rear view mirror cover
Removing
1. Remove glass and motor.
2. Loosen the fixing screws.
3. Remove the frame.
4. Loosen the fixing screws.
5. Remove the cover.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments