Removing the transfer case
1. Remove cardan shaft.
2. Drain the gear oil from the gearbox.
3. Disconnect the right drive shaft.
4. Remove the front fender liner.
5. Remove the subframe.
6. Remove the gearbox rear mounting bracket.
7. If equipped, remove the bleed hose.
8. Loosen the bolts (1) support bracket mounting.
9. Loosen the bolts (2) fastening the support bracket to the engine.
10. Support the transfer box with a suitable jack and secure with cable braces.
11. Using a special socket DT-48783, unscrew the bolts (3) distribution box.
12. Lower and remove the transfer case.
Visitor comments