Driver Information Center
Driver Information Center (DIC) located in the instrument cluster between the speedometer and tachometer.
Depending on the vehicle configuration, the following main menus can be selected:
- Vehicle information menu.
- Route information/fuel menu.
Some of the functions displayed are only available while the vehicle is in motion.
Setting menus and functions
Menus and functions are selected using the keys on the combination indicator switch.
Use the MENU key to move between menus or to return from a submenu to the previous level.
Turn the handwheel to highlight the desired menu item or set a numeric value.
Press the SET/CLR key to select a function or confirm a message.
Vehicle information menu
Press the MENU key to select the vehicle information menu. Turn the handwheel to select one of the submenus. Press the SET/CLR key to confirm your selection.
Follow the instructions given in the submenu.
Possible submenus:
- Units of measure: Change the displayed units of measure.
- Tire pressure.
- Remaining oil life.
- Coolant temperature.
- Reprogram remote key: reprogramming after battery replacement.
- Compass: Displays the compass along with the navigation system.
- Battery Voltage: Displays the battery voltage value.
- Overspeed Warning: When a pre-set speed is exceeded, a warning buzzer will sound;
- Language: Change the system language.
The selection and indication may differ from those shown on the display.
Route Information/Fuel Menu
Press the MENU key to select the route/fuel information submenu.
Turn the handwheel to select one of the submenus. Press the SET/CLR key to confirm your selection.
Trip/fuel data menu.
Black and white information display, color information display
Depending on the configuration, the vehicle can be equipped with a graphical or color information display. The information display is located on the instrument panel above the infotainment system.
Black and white information display
Depending on the type of infotainment system installed, the car can be equipped with one of two types of black and white information display.
The black and white information display shows:
- time;
- outside air temperature;
- date;
- infotainment system data;
- individual vehicle settings.
Color information display
The color information display shows in color:
- time;
- outside air temperature;
- date;
- infotainment system data;
- navigation system data;
- system settings;
- vehicle messages;
- individual vehicle settings.
The type of information and how the data is displayed depends on the vehicle equipment and settings.
Selecting menus and settings
Menus and settings are accessed via the display.
The choice is made using:
- menu;
- function keys and the infotainment multifunction knob.
Selection using the infotainment system controls
Select a function using the infotainment system buttons. The menu of the selected function is displayed. The controller wheel is used to select a menu item and confirm the selection made.
Selection with the multifunctional control unit
Select a function using the buttons on the multifunctional block. The menu of the selected function is displayed.
Multifunctional handle
The multifunction knob is the main control tool for the menu.
turn the handle
- to mark a menu option;
- to set a numeric value or display), menu option.
Click (outer ring)
- to select or enable the checked option;
- to confirm the set value;
- to enable/disable the system function.
BACK button
Click the button to:
- exit the menu without changing the settings;
- return from a submenu to a higher menu level;
- delete the last character in a character sequence.
Press and hold the button for a few seconds to delete the entire entry.
Visitor comments