Handle 1 is used to adjust the angle of the backrest, handle 2 is used to adjust the position of the seat cushion in the vertical direction, handle 3 is used to adjust the position of the seat cushion in the longitudinal direction (three-door cars) designed handle 4.
Depending on the equipment, the front seats can be equipped with adjustable lumbar support...
...and an adjustable cushion.
The steering wheel of the car can be adjusted in height and reach. To adjust, lower the lock lever located under the steering column.
Warning! Do not adjust the position of the driver's seat and steering wheel while the vehicle is in motion to prevent loss of control of the vehicle.
When adjusting the position of the steering wheel and seat should be guided by the following rules.
- 1. With the brake pedal fully depressed, the right leg should be bent at the knee.
- 2. The steering wheel rim and hub must not overlap the instrument cluster.
- 3. Wrist of outstretched hand (the back should not come off the back of the seat) should rest on top of the steering wheel.
Such a landing is the least tiring and allows you to operate the vehicle controls as quickly as possible in case of a sudden change in the traffic situation.
Visitor comments