The system consists of:
- adapters;
- luggage nets;
- hooks;
- auxiliary block;
- belt set.
The components are installed in two rails on both side panels using adapters and hooks.
Installing rail adapters
Fold out the handle bar, insert the adapter into the upper and lower grooves of the guide, and slide the adapter into the required position. Rotate the handle bar up to lock the adapter. To remove, turn the handle bar down and slide the adapter out of the guide.
Adjustable mesh baffle
Insert the adapters into the required positions in the guides. Attach the mesh rod halves together. To install, you need to lightly press the rods together and insert them into the corresponding holes in the adapters.
To remove, squeeze the mesh rods together and remove them from the adapters.
Mesh pocket
Insert the adapters into the required positions in the guides.
A mesh string bag can be hung on adapters.
Installing hooks on rails
First, insert the hook into the required position in the upper groove of the guide, and then press it into the lower groove. To remove, first pull the hook out of the top groove.
Auxiliary block
Install two hooks on the top rail. Insert the top drawer brackets into the hooks from above.
You can also install two hooks in the bottom rail. Insert the bottom brackets of the unit from above into the bottom hooks.
Belt set
Insert the strap set adapters into the guide. Make sure the belt is not twisted. There are two locks on the strap set that need to be unlocked. The belt can be stretched.
Visitor comments